Remove pine pitch and sap from industrial and commercial saw blades without using a toxic, solvent base cleaners. Fabulene, which is a USDA approved water based cleaner cuts pitch in seconds and can be safely flushed down the drain with a water rinse. Used by the lumber industry since 1950, Fabulene continues to meet the needs of the countries oldest and largest pine and lumber producers.
Effective and Economical:
Fabulene is a concentrated formula that can be sprayed on and scrubbed with blades in place or used in warm dip tanks. Fabulene is non-flammable and non-explosive and does not have a strong or offensive smell. Available in 5 gallon pails, 55 gallon drums & 275 gallon totes. Large quantity and distribution pricing available. Call 800-944-4623 or email firstname.lastname@example.org.
Any exposed porous surface such a concrete, brick or natural stone is susceptible to staining and discoloration. Stains can come from water, oil, organic and food based substances. Our customers expect their masonry to stay clean and pristine and often turn to clear sealers to provide protection and reduce maintenance costs. However not all sealers are the same when it comes to oil and staining. Many of the penetrating type sealers are silane /siloxane sealers (silicone based). These penetrating sealers are effective in sealing out water but do not protect against oil based stains from petroleum products or from fat grease found in foods. Acrylic based sealers can offer oil stain protection but are “film forming” and darken the surface and often times have a glossy finish.
The Chargar Corporation has introduced a new and unique masonry sealer formulated with patented stain blocking resins prevents staining on surfaces as well as water and oil repellency. Ultimate Stain Repellent has unique qualities, doesn’t change the appearance of the surface and is not a film forming type sealer. It resists motor oil, transmission fluids, diesel fuel, wine, ketchup, grease from grilling foods, soft drinks. Many sealers do a great job repelling water and moisture intrusion but fail at blocking the buildup of oil and staining type soils.
Ultimate Stain Repellent penetrates into porous materials, creating a long-lasting barrier that “locks-out” oils, water and soil. This barrier forces liquids to bead up on the surface, allowing them to be picked up more easily, and preventing them from causing a stain. The penetrating sealer will not only provide improved chemical and oil resistance, but it will also prevent dusting, spalling and inhibit efflorescence.
New Masonry detergent 700 is a blend of organic and inorganic acids combined with special wetting
systems and inhibitors formulated for final cleandown of new masonry. 700 detergent effectively removes excess
mortar, job dirt, and normal job stains from brick, stone tile, exposed aggregate and other types of
new masonry construction not subject to metallic stains. It is safer to handle than Muriatic acid.
700 Detergent is formulated with special wetting agents and inhibitors which allow the product to remain on the porous masonry
for longer periods of time. This provides maximum efficiency in the cleaning solutions.
700 Detergent penetrates mortar smears fast, allowing a pressure rinse to remove them completely
with minimal scrubbing . Proper application of 700 detergent leaves the masonry surface clean and uniform with no acid
burning or streaking.
700 detergent is concentrated for ease in handling and shipping. Five gallons of 700 detergent
makes up to 40 gallons of cleaner.
A quick-drying fire-proof safety solvent having no flash point and no fire point, used for cleaning all kinds of electrical machinery and equipment even while in operation. It’s electrically non-conductive, non-explosive and non-toxic to bodily organs under normal usage when used as directed. Meets OSHA safety guidelines for solvents.
Electroniks is sprayed on electrical machinerry and equipments, without loss of time due to shut downs for disassembling purposes. Oil, grease, carbon and dirt will be dissolved quickly and safely. Blowing dry with compressed air is recommended, but optional.
Electroniks is also used as a cold tank dip cleaner, as well as in wiping applications…fast evaporation makes adequate ventilation necessary.