Pentetrating Water Repellent - Enviro-Shield 40%

$38.15$1,464.10

Penetrating Water Repellent – Fast drying and High Solids

Enviro-Shield 40% is a deep penetrating water repellent.  It is made with a solvent-free ethoxy-functional oligomeric siloxane providing excellent beading effect of treated substrates.  Chemically reacting with masonry such as brick, block, natural and blue stone, Enviro-Shield 40% forms a highly effective poly-siloxane repellent.  Will seal and protect brick, concrete, blue stone, block CMU and more from damage due to water ingress.

The advantages of Enviro-Shield 40% include:

  • Excellent beading effect – High solids content
  • Effective protection even in wind driven, heavy rainfall
  • Reduction of efflorescence
  • Protection against de-icing salts
  • Normally no visible change of the surface and virtually no reduction of vapor permeability
  • Colder working temps – down to 25°F
  • Fast Drying
  • High penetration depth (depending on active content)

Parking garages, flat concrete or masonry surfaces can also be sealed therefore reducing attacks from deicing salts brought in from cars.  For areas where a solvent based sealer can not be used we recommend Klere-Treat WB, a safe and easy to use water based sealer.

Coverage Rate:

Brick, Concrete, most masonry: 150 ft² per gallon

Block & Split Face CMU: 100 ft² per gallon

Further Protection:

Our high solids and deep penetrating water repellent seals the masonry surface preventing water and moisture from penetrating and damaging the surface.  Water will also migrate in through cracks in joints or mortar, leaking roofs or dozen other ways.  Weep holes allow trapped moisture to escape.  Our Drain Only Weep Tubes efficiently wick away moisture while at the same time preventing insects, dirt and debris from entering the weep holes.

Clear