Klere-Treat WB is a non film forming brick sealer and it is non toxic. A wet on wet application will stop water from soaking into the bricks and mortar joints. Klere-Treat is a heavy duty professional sealer that can be applied with a simple hand held pump sprayer or spray bottle. Application is quick and easy.
A Time Tested Formula
Chargar Corp. has been manufacturing Klere-Treat WB for over 30 years. It has safely protected schools and universities, churches, large high rise buildings, commercial and industrial warehouses and more.
Our skilled service department has a combined 6 decades of experience making and selling masonry waterproofing materials. Over the years our customers have come to rely on our technical knowledge to help get the job done. Email us anytime and we will respond with an answer within 24 hours. We have experts on our staff that can answer easy or hard waterproofing questions. To speak with one of our technicians call 800-922-4623.
Our waterproofers and water repellents are made with industry leading raw materials and resins. We can customize products to increase resin content for difficult to seal substrates like open faced and split rib block.
This picture is an example of a neglected chimney which over the years has been allowed to absorb water and the results are the damaged joints and the destruction of the whole chimney. This chimney will require a professional to set up staging, cut out loose and bad mortar joints and then apply new mortar to the joints. There are many clear sealers on the market, they all proclaim to be the best, use my product, but when you read the fine print they all work best when applied to a sound surface. Clear sealers cannot take the place of mortar and sound solid bricks. Clear sealers, the active solids left behind in the pores of the masonry can only work properly when the mortar joints are tuck pointed tightly and the bricks don’t have spalling faces and the roof cap cannot have mortar missing. The roof flashing must be in good shape or sealing your chimney will only stop some of the water.
Our products are always made with the highest quality resins and powders. A technician is always available to offer assistance and guidance in using our products.
A neglected brick chimney will look like one of these pictured here within a few years of neglect. The Chargar Corporation under the trade name of Florok, manufactures brick sealers that are clear, odorless, and non toxic. The Chargar Corportion has been manufacturing clear masonry sealers since 1950. The experts at The Chargar Corporation can suggest the best method of repair for your brick chimney as well as suggest the best sealer for your particular application. 1-800-922-4623 firstname.lastname@example.org
This is what a brick chimney will look like with a few years of neglect. The Chargar Corporation manufactures a clear professional grade water repellents that will prevent much of what you see in this picture . Many owners of single family homes think that it requires special equipment to seal bricks. This is not true, Klere-Treat WB can be applied with what many call bug sprayers or hand pump up sprayers. A good saturating application of Klere-Treat WB will protect your investment and save you in hundreds of dollars in repointing work or complete rebuild. Klere -Treat WB is non toxic and non hazardous, it lasts as much as 10 years. Klere-Treat WB works by soaking into the pores of the masonry chimney and chemically reacts from the alkalinity within the masonry to form a water repellent barrier and is completely breathable. For more information on Klere-Treat WB go to www.chargar.com and click on water repellents or call one of our technical advisors at 1-800-922-4623
Klere-Treat WB is a masonry water repellent based on a silane and siloxane. Under the influence of atmospheric humidity, it chemically reacts with and bonds to masonry, forming a highly effective poly-siloxane repellent. It is highly alkaline resistant and designed for use on brick, concrete block, precast concrete, stucco, limestone, fieldstone and many other natural stones.
Kleare-Treat WB provides superior protection against moisture penetration, thereby preventing the deleterious effects of efflorescence. The deep penetrating application retains it’s natural appearance with no surface build up or darkening effects. The masonry remains completely breathable.
Klere-Treat WB can also be applied to parking garages and flat concrete or masonry surfaces to reduce attack from deicing salts.
The advantages of Klere-Treat WB include:
Deep Penetration into surfaces
Does non contain wax, gum resins, silicas or silicones
Unlike many water repellents Klere-Treat WB does not break down due to alkali in masonry.
Enviro-Shield 40WB is a water based, VOC compliant, high performance, clear, penetrating water repellent sealer. It is designed to provide long term protection for brick, blocks, Jersey barriers, vertical or horizontal concrete and natural stones and other porous surfaces.
Enviro-Shield 40WB repels water on masonry surfaces for up to 10 years and can be sprayed with a low pressure sprayer, allowing it to thoroughly soak the surface up 1/2″ deep.
Enviro-Shield is easy to use. Overspray can be washed off with soap and water. Sprayers and tools can be washed with soap and water.
Enviro-shield is available in formulas of 20% solids and 40% solids. Enviro-shield is an excellent cold weather water repellent since it will not freeze.
Weep tubes for masonry weep holes. Weep holes are the gaps left between some bricks in external masonry walls. They serve 2 purpose:
Ventilation of the internal wall cavity – Without ventilation, mildew, dry rot and damp reduce the life of the internal wall studs and other building materials within the cavity. Inadequate ventilation is the main cause of “Leaky Building Syndrome”.
Drainage– Water that enters the cavity due to capillary action, condensation, damage, or accidental flooding needs to escape somewhere.
One end of the tube is bent in a downward position to prevent wind driven rain from being forced back into the tube. This also prevents water running down the wall from re-entering the building. They will not fill with sediment because the fabric filters it, but allows the water to drain.
Standard size weep tubes
Our standard size weep tubes are 3.5 inchess in length and have an outside diameter of 3/8 inches (inside diameter 1/4 inch.)