Description
More protection with our High Performance Clear Urethane
Epoxy floors are resilient, impact resistant, somewhat flexible and hard. They definitely supplement an efficient, durable and long lasting floor coating system by providing build thickness. However, the best results come from an epoxy floor with a thin-film polyurethane (often referred to as a “urethane”) topcoat.
Chargar High Performance 520 Urethane is a two component polyester/aliphatic polyurethane floor sealer. It exhibits excellent characteristics for abrasion resistance, chemical resistance, flexibility, weathering and UV stability. Use this product if a lower gloss finish is the preferred look. Our customers have used it auto service centers, warehouses, computer rooms, laboratories, aircraft hangers, cafeterias, exterior tanks, indoor or outdoor service and chemical exposure areas. Use as a top coat for decorative epoxy flake system.
A polyurethane topcoat adds chemical resistance, scratch resistance, gloss retention, yellowing resistance and easier clean-ability to an “epoxy” floor coating system. Additionally, fine aggregate additives made from silica sand, aluminum oxide, or even spherical glass bead stirred into the urethane topcoat adds significant slip and wear-resistance while maintaining easy clean-ability. These additives will break up the gloss which hides, or camouflages, unavoidable bits of dirt and settled airborne particles. These also hide minor imperfections in the concrete substrate, especially if a satin finish urethane is used.
California Residents:
This item can be shipped to California.
Technical Specs
Coverage Rate: Each kit will cover from 450-750 ft² depending on smoothness of the surface being coated.
CURE SCHEDULE: (70°F)
pot life – 1 1/2 gallons volume 2-5 hours
tack free (dry to touch) 2-4 hours
recoat or topcoat 4-8 hours
light foot traffic 14-24 hours
full cure (heavy traffic) 3-5 days
