Our skilled service department has a combined 6 decades of experience making and selling masonry waterproofing materials. Over the years our customers have come to rely on our technical knowledge to help get the job done. Email us anytime and we will respond with an answer within 24 hours. We have experts on our staff that can answer easy or hard waterproofing questions. To speak with one of our technicians call 800-922-4623.
Our waterproofers and water repellents are made with industry leading raw materials and resins. We can customize products to increase resin content for difficult to seal substrates like open faced and split rib block.
Efflorescence is a crystalline deposit of salts often seen on the surface of concrete, brick, stucco, or natural stone surfaces. It occurs when water is present on or in the masonry surface. It sparkles. It’s white, sometimes with a grayish tint.
How do I stop it?
These deposits, which are often a byproduct of the manufacturing process, are carried to the surface by water within the masonry. AC-3 Cleaner removes efflorescence from masonry without the use of Muriatic Acid. Sealing the masonry surface with one of our sealers will prevent water from entering and carrying more salts and minerals to the surface.
The Chargar Corporation of Hamden, Connecticut has introduced a new and unique masonry sealer that not only repels water but prevents staining on surfaces to which it is applied to because of its patented stain blocker. It resists motor oil, transmission fluids, diesel fuel, wine, ketchup, grease from grilling foods, soft drinks. Many sealers are available which do a great job repelling water and moisture intrusion but fail at blocking the buildup of oil and staining type soils. Ultimate Stain Repellent has unique qualities, it doesn’t change the appearance of the surface and is not a film forming type sealer.
For more information go to www.chargar.com and click on Ultimate Stain Repellent. 1-800-922-4623
This picture is an example of a neglected chimney which over the years has been allowed to absorb water and the results are the damaged joints and the destruction of the whole chimney. This chimney will require a professional to set up staging, cut out loose and bad mortar joints and then apply new mortar to the joints. There are many clear sealers on the market, they all proclaim to be the best, use my product, but when you read the fine print they all work best when applied to a sound surface. Clear sealers cannot take the place of mortar and sound solid bricks. Clear sealers, the active solids left behind in the pores of the masonry can only work properly when the mortar joints are tuck pointed tightly and the bricks don’t have spalling faces and the roof cap cannot have mortar missing. The roof flashing must be in good shape or sealing your chimney will only stop some of the water.
Our products are always made with the highest quality resins and powders. A technician is always available to offer assistance and guidance in using our products.
A neglected brick chimney will look like one of these pictured here within a few years of neglect. The Chargar Corporation under the trade name of Florok, manufactures brick sealers that are clear, odorless, and non toxic. The Chargar Corportion has been manufacturing clear masonry sealers since 1950. The experts at The Chargar Corporation can suggest the best method of repair for your brick chimney as well as suggest the best sealer for your particular application. 1-800-922-4623 email@example.com
Traditionally, basement waterproofing always involved excavating the foundation; a costly undertaking indeed. Today there are a number of ways to fix wet basements from within the basement itself – a much less expensive (and less destructive) proposition.
There are many ways to stop ground water from entering a finished basement through a leaking crack, but none of them are as simple as using our Epoxy Waterproofer. Just brush it over a crack, allow it to set and you’re done, no chipping and no patching. Wide cracks can be sealed by mixing clean silica sand into the epoxy to make an epoxy mortar that will stay in place while it cures. Watch our video to see how simple it is.
This is what a brick chimney will look like with a few years of neglect. The Chargar Corporation manufactures a clear professional grade water repellents that will prevent much of what you see in this picture . Many owners of single family homes think that it requires special equipment to seal bricks. This is not true, Klere-Treat WB can be applied with what many call bug sprayers or hand pump up sprayers. A good saturating application of Klere-Treat WB will protect your investment and save you in hundreds of dollars in repointing work or complete rebuild. Klere -Treat WB is non toxic and non hazardous, it lasts as much as 10 years. Klere-Treat WB works by soaking into the pores of the masonry chimney and chemically reacts from the alkalinity within the masonry to form a water repellent barrier and is completely breathable. For more information on Klere-Treat WB go to www.chargar.com and click on water repellents or call one of our technical advisors at 1-800-922-4623
Ultimate Stain Repellent is a clear penetrating sealer, breathable, non film forming and VOC compliant water based solution. The main benefits of Ultimate Stain Repellent are resistance to automotive fluids, food products such as mustard, mayonnaise, ketchup, wine. Can be used on vertical or horizontal applications. Ultimate Stain Repellent is also an excellent water repellent.
Klere-Treat WB is a masonry water repellent based on a silane and siloxane. Under the influence of atmospheric humidity, it chemically reacts with and bonds to masonry, forming a highly effective poly-siloxane repellent. It is highly alkaline resistant and designed for use on brick, concrete block, precast concrete, stucco, limestone, fieldstone and many other natural stones.
Kleare-Treat WB provides superior protection against moisture penetration, thereby preventing the deleterious effects of efflorescence. The deep penetrating application retains it’s natural appearance with no surface build up or darkening effects. The masonry remains completely breathable.
Klere-Treat WB can also be applied to parking garages and flat concrete or masonry surfaces to reduce attack from deicing salts.
The advantages of Klere-Treat WB include:
Deep Penetration into surfaces
Does non contain wax, gum resins, silicas or silicones
Unlike many water repellents Klere-Treat WB does not break down due to alkali in masonry.
Enviro-Shield 40WB is a water based, VOC compliant, high performance, clear, penetrating water repellent sealer. It is designed to provide long term protection for brick, blocks, Jersey barriers, vertical or horizontal concrete and natural stones and other porous surfaces.
Enviro-Shield 40WB repels water on masonry surfaces for up to 10 years and can be sprayed with a low pressure sprayer, allowing it to thoroughly soak the surface up 1/2″ deep.
Enviro-Shield is easy to use. Overspray can be washed off with soap and water. Sprayers and tools can be washed with soap and water.
Enviro-shield is available in formulas of 20% solids and 40% solids. Enviro-shield is an excellent cold weather water repellent since it will not freeze.