Epoxy Waterproofer has been brush applied over a crack which has been filled with hydraulic cement. If the crack opening is larger than 1/8″ pack with hydraulic cement. Allow hydraulic cement to set for 15 minutes. Mix a small amount of Epoxy Waterproofer, enough to cover the hydraulic cement filled crack. Brush apply a liberal amount over the crack with a minimum of 1/2″ overlapping the crack. Once the Epoxy Waterproofer has set 24 hrs this crack is finished and will withstand tons of water without leaking. Color packs can be added to the clear material in order to better match the surrounding area.
The dreaded leaking basement. There are a lot of reasons why rainwater can enter into a basement. One of the most overlooked reason is a crack in the wall or floor or a separation of the concrete floor from the concrete wall. Also tie holes can allow water to enter into the basement. You don’t have to be an expert to determine where the water is coming from. Just follow the path of the water and you can usually pin point the area.
What can I do?
Cracks in the walls or floors can allow a tremendous amount of water to enter into a basement. Simple repairs can be done to stop this water from entering the basement. Chargar Corpration has a unique Epoxy that can be brushed applied to these areas. Epoxy Waterproofer is simple to use and apply. Two brush coat applications over these cracks will form a waterproof, durable film that is impervious to water. It will hold back hydro static water pressure. Epoxy Waterproofer can also be applied to a larger area of the floor or wall to make these areas waterproof. Epoxy Waterproofer does not contain solvents and has very little odor, so it can be used in confined areas. Epoxy Waterproofer is used by the professionals to waterproof basements .