Patch It - Fast Setting Concrete Patch Repair Mortar

Fast Setting concrete patch for vertical and horizontal uses – sets in 20 minutes

Product Description:

PATCH IT is a fast setting, single component repair mortar for use over concrete, masonry and wood.  Portland cement based and polymer modified, it provides a high bonding and high strength patch from 1/2″ down to a feather edge.  For applications 1/2″ or greater do successive layers of 1/2″.  If the product is applied thicker than this in one application cracking can occur.  Its accelerated set time allows for quick finishing and short down time.  For deeper and stronger bonding the surface can should be primed with Plas-Tex RTU liquid acrylic polymer.  Once cured Patch It can be stained, epoxy coated or sealed with a water repellent for added protection and durability.

USES:

• Patch spalled concrete areas
• Level low areas in concrete slabs
• Setting bed for brick, flagstone, quarry tile, pavers, etc.
• Repoint all masonry joints and grouting between floor tile, marble and flagstone
• Fast set patch for Concrete floors, driveways, walkways, steps and patios
• Horizontal or vertical surfaces
• Indoors or outdoors, above or below grade

ADVANTAGES:

• Fast setting – 20 minutes
• One component, add water only
• Easy to apply
• High bond and compressive strength
• Self-curing, natural cement color
• Can be feather edged
• Non-shrink, non-staining
• Accepts cement based and latex paints after curing
• Provides water resistant finish

Coverage:
1 pound of PATCH IT covers approximately 1 square foot at 1/8″ thickness.  Used as a repointing mortar, 1 pound will fill 17 cubic inches.

Packaging:
Available in 40 pound multi-wall paper bags with moisture barrier.  Pallets available, please call 800-922-4623.

Color:
Light Gray

TECHNICAL DATA:

Compressive Strength (ASTM C-109)
7 days . . . . . . . . . . . . . . . . . . . .4250 psi
28 days . . . . . . . . . . . . . . . . . .  5450 psi
Tensile Strength (ASTM C-190)
7 days . . . . . . . . . . . . . . . . . . . . 385 psi
28 days . . . . . . . . . . . . . . . . . . . 475 psi
Flexural Strength (ASTM C-348)
7 days . . . . . . . . . . . . . . . . . . . . .700 psi
28 days . . . . . . . . . . . . . . . . . . . .825 psi
Shear Bond Strength (ASTM C-882)
7 days . . . . . . . . . . . . . . . . . . . . .390 psi
28 days . . . . . . . . . . . . . . . . . . .  490 psi