Posted on

Leaking basement walls

waterproof sealer, leaking basement

Stop water leaks through my basement wall?

A leaking basement is a common problem that has a very simple solution.  Water can seep through foundation walls leaving minerals on the surface or even puddles on the floor.  Without proper ventilation mold and mildew will quickly take root.  Concrete or block walls may begin to soften or even crumble from prolonged water damage.  It can be used as a waterproofing underlayment for long term water protection. Stop the water for good with Epoxy Waterproofer!  For 40 years Epoxy Waterproofer has proven it’s ability to stop water and withstand tons of hydro-static pressure.

Stop Radon Gas:

Epoxy Waterproofer works by creating a 15 mil impervious film on the surface of the wall that tenaciously bonds with the strength of 100% epoxy.  An added result of completely stopping the transmission of water is that you also stop the transmission of vapor and gases, including radon gas.  Epoxy Waterproofer will seal your basement or garage and prevent the intrusion of radon gases.

It’s Safe and Easy to Apply

No solvents are added to this 100% epoxy, there is no obnoxious smells or toxic fumes.  Application is as easy as evenly mixing the part B into the part A and then applying with a brush or roller over the affected areas.  Add color packs if desired in order to tint the epoxy to easier blend away or hide repairs to your leaking basement.

Epoxy Waterproofer withstands hydro-static pressure and will not peel or flake off of the surface.

To purchase Epoxy Waterproofer – Click Here

 

Posted on

Save my chimney

Save my chimney

This picture is an example of a neglected chimney which over the years has been allowed to absorb water and the results are the damaged joints and the destruction of the whole chimney.  This chimney will require a professional to set up staging, cut out loose and bad mortar joints and then apply new mortar to the joints.  There are many clear sealers on the market, they all proclaim to be the best, use my product, but when you read the fine print they all work best when applied to a sound surface.  Clear sealers cannot take the place of mortar and sound solid bricks. Clear sealers, the active solids left behind in the pores of the masonry can only work properly when the mortar joints are tuck pointed tightly and the bricks don’t have spalling faces and the roof cap cannot have mortar missing.  The roof flashing must be in good shape or sealing your chimney will only stop some of the water.

Our products are always made with the highest quality resins and powders.  A technician is always available to offer assistance and guidance in using our products.

More information or to order

or call 1-800-922-4623.

Posted on

My Brick Chimney is Leaking

Clean salt deposits

efflorescenceBrick Chimney falling down

 

 

A neglected brick chimney will look like one of these pictured here within a few years of neglect. The Chargar Corporation under the trade name of Florok, manufactures brick sealers that are clear, odorless, and non toxic. The Chargar Corportion has been manufacturing clear masonry sealers since 1950.  The experts at The Chargar Corporation can suggest the best method of repair for your brick chimney as well as suggest the best sealer for your particular application. 1-800-922-4623 answers@chargar.com

Posted on

Klere Treat WB – Ready to Use Masonry Water Repellent

brick sealer, chimney sealer

Klere-Treat WB is a masonry water repellent based on a silane and siloxane. Under the influence of atmospheric humidity, it chemically reacts with and bonds to masonry, forming a highly effective poly-siloxane repellent.  It is highly alkaline resistant and designed for use on brick, concrete block, precast concrete, stucco, limestone, fieldstone and many other natural stones.

Kleare-Treat WB provides superior protection against moisture penetration, thereby preventing the deleterious effects of efflorescence. The deep penetrating application retains it’s natural appearance with no surface build up or darkening effects. The masonry remains completely breathable.

Klere-Treat WB can also be applied to parking garages and flat concrete or masonry surfaces to reduce attack from deicing salts.

The advantages of Klere-Treat WB include:

    • Deep Penetration into surfaces
    • Non-film forming 
    • Does non contain wax, gum resins, silicas or silicones 
    • Unlike many water repellents Klere-Treat WB does not break down due to alkali in masonry. 
    • Resists water penetration for 10 years 
    • Highly resistant to acid rain 
    • Safe water based formula, water cleanup 
    • No toxic fumes or vapors

New Klere Treat Data New Klere Treat Data Page 2




 

Product MSDS