Stop Water – This is a common problem that has a very simple solution. Water can seep through foundation walls leaving stains on the surface or even puddles on the floor. Stop the water for good with Epoxy Waterproofer! We have been making this 2 part waterproofing epoxy for 40 years and have stopped thousands of gallons of water from damaging basements.
It’s Safe and Easy to Apply
No solvents are added to this 100% epoxy, there is no obnoxious smells or toxic fumes. Application is as easy as mixing the part B into the part A and then applying with a brush or roller over the affected areas. Add color packs if desired in order to tint the epoxy to easier blend or hide repairs.
Epoxy Waterproofer withstands hydro-static pressure and will not peel or flake off of the surface.
Epoxy Waterproofer contains 100% solids and is applied from a thin brush application up to a 1/8th inch thick cladding capable of withstanding hydrostatic pressure and stopping radon gas migration in a leaking basement. Cracks and patches can be repaired and made waterproof by adding clean silica sand to Epoxy Waterproofer.
Know the difference between “sealed” and “waterproof”. Epoxy Waterproofer is a specially formulated, heavy bodied, thermo setting, self curing epoxy that hardens to a ceramic like, non-porous, clear, impermeable and waterproof film. This is a 2 part 100% solids epoxy that cures clear or can be pigments to a variety of colors by adding a color pack. Use on interior/exterior foundations, precast concrete tanks, stone, potable water tanks, ponds, waterfalls, pools etc.
Epoxy Waterproofer has been brush applied over a crack which has been filled with hydraulic cement. If the crack opening is larger than 1/8″ pack with hydraulic cement. Allow hydraulic cement to set for 15 minutes. Mix a small amount of Epoxy Waterproofer, enough to cover the hydraulic cement filled crack. Brush apply a liberal amount over the crack with a minimum of 1/2″ overlapping the crack. Once the Epoxy Waterproofer has set 24 hrs this crack is finished and will withstand tons of water without leaking. Color packs can be added to the clear material in order to better match the surrounding area.
The dreaded leaking basement. There are a lot of reasons why rainwater can enter into a basement. One of the most overlooked reason is a crack in the wall or floor or a separation of the concrete floor from the concrete wall. Also tie holes can allow water to enter into the basement. You don’t have to be an expert to determine where the water is coming from. Just follow the path of the water and you can usually pin point the area.
What can I do?
Cracks in the walls or floors can allow a tremendous amount of water to enter into a basement. Simple repairs can be done to stop this water from entering the basement. Chargar Corpration has a unique Epoxy that can be brushed applied to these areas. Epoxy Waterproofer is simple to use and apply. Two brush coat applications over these cracks will form a waterproof, durable film that is impervious to water. It will hold back hydro static water pressure. Epoxy Waterproofer can also be applied to a larger area of the floor or wall to make these areas waterproof. Epoxy Waterproofer does not contain solvents and has very little odor, so it can be used in confined areas. Epoxy Waterproofer is used by the professionals to waterproof basements .
Many leaking fish ponds are constructed of cement plaster over concrete blocks. From thermal movement these ponds will sometimes develop hairline cracks which will then leak water out. Many people will chip the crack out and do the usual hydraulic cement patch, and within a short period of time it cracks again. The Chargar Corporation has developed a thick 100% epoxy coating that can bridge the crack, waterproof it and prevent further cracking from movement. The Epoxy Waterproofer can be brushed applied over the crack forming a 15 mil impervious film. It has slight expansion and contraction ability. It comes in clear or colors.
Won’t Harm the Fish
Since Epoxy Waterproofer is 100% solids it becomes completely inert once it has fully cured. This means that it will not leach any harmful chemicals and will not hurt the livestock. It will not cause any algae issues by leaching nitrates or phosphates. Customers have used this epoxy to seal ponds for over 30 years with no ill effects.
Ponds aren’t the only use for Epoxy Waterproofer. It can be used to build and seal water fountains of any size. Since it is safe to use with potable water, many customers in the agricultural industry have used Epoxy Waterproofer to seal animal drinking troughs and and cisterns.
For more information call 800-922-4623 or email firstname.lastname@example.org