Posted on

Epoxy Coat Decorative Flake System

Decorative Epoxy Flake System

Decorative Epoxy Flake System is a decorative and extremely durable concrete resurfacing system.  It is used for environments requiring an attractive, aesthetically pleasing, high performance floor.  Available in endless colors and patterns to suit any environment.   Also known as decorative vinyl color chips, flakes or fleck are specially formulated paint aggregates used to enhance the aesthetic qualities of seamless, resin-based chip/flake flooring systems. This unique product is random in shape, sized within a standardized range and custom blended to match any décor.

Epoxy Flake floors are continuing to gain popularity amongst architects, designers, contractors and consumers, because of their unique properties that deliver complete customization to commercial, residential and industrial floors with an endless range color-styles, texture, size and blending options.


Posted on

Concrete Snap Tie Leaks


How to stop running water coming from a snap tie pocket in a basement wall.

1. Remove the snap tie from the wall, wire brush the surface of the concrete.

2. For holes bigger than an 1/8″ , fill with Waterprlug Hydraulic cement. Allow the Waterplug to set for 30 minutes

3. Brush on a heavy coat of Epoxy Waterproofer over the Waterplug and overlap 1″ all the way around the patch.

The Epoxy Waterproofer can be used without Waterplug if the pocket left by the snap tie is less than 1/8″ in diameter.

This repair is permanent and will prepare your wall to accept further waterproofing coatings.

For more info on Epoxy Waterproofer go to or call 1-800-922-4623 See our video on how to apply Epoxy Waterproofer.

Leaky snap tie hole
Hydraulic cement stopping leaky snap tie
Snap tie leak stopped with hydraulic cement
Epoxy Waterproofer applied


Posted on

Save my chimney

Save my chimney

This picture is an example of a neglected chimney which over the years has been allowed to absorb water and the results are the damaged joints and the destruction of the whole chimney.  This chimney will require a professional to set up staging, cut out loose and bad mortar joints and then apply new mortar to the joints.  There are many clear sealers on the market, they all proclaim to be the best, use my product, but when you read the fine print they all work best when applied to a sound surface.  Clear sealers cannot take the place of mortar and sound solid bricks. Clear sealers, the active solids left behind in the pores of the masonry can only work properly when the mortar joints are tuck pointed tightly and the bricks don’t have spalling faces and the roof cap cannot have mortar missing.  The roof flashing must be in good shape or sealing your chimney will only stop some of the water.

Our products are always made with the highest quality resins and powders.  A technician is always available to offer assistance and guidance in using our products.

More information or to order

or call 1-800-922-4623.

Posted on

How to stop water from a leaking crack in my basement

leaking crack in basement

Traditionally, basement waterproofing always involved excavating the foundation; a costly undertaking indeed.  Today there are a number of ways to fix wet basements from within the basement itself – a much less expensive (and less destructive) proposition.

There are many ways to stop ground water from entering a finished basement through a leaking crack, but none of them are as simple as using our Epoxy Waterproofer.  Just brush it over a crack, allow it to set and you’re done, no chipping  and no patching. Wide cracks can be sealed by mixing clean silica sand into the epoxy to make an epoxy mortar that will stay in place while it cures.  Watch our video to see how simple it is.

To purchase Epoxy Waterproofer click here.

For more info call our technicians at The Chargar Corp. 1-800-922-4623  or email us at


Posted on

De-icing Salts Attacking Concrete Surfaces

De-Icings salts such as rock salt, calcium chloride, magnesium chloride, and other salt related products all do damage to concrete surfaces. Salt Block does not allow the salt water created by the de-icing salt from soaking into the concrete and destroying your concrete surface. A treatment of Salt Block will save you hundreds of dollars in future concrete repairs.



spalling            spalling4         spalling2




Salt Blocker WB

Posted on

Klere Treat WB – Ready to Use Masonry Water Repellent

brick sealer water repellent

Klere-Treat WB is a masonry water repellent based on a silane and siloxane. Under the influence of atmospheric humidity, it chemically reacts with and bonds to masonry, forming a highly effective poly-siloxane repellent.  It is highly alkaline resistant and designed for use on brick, concrete block, precast concrete, stucco, limestone, fieldstone and many other natural stones.

Kleare-Treat WB provides superior protection against moisture penetration, thereby preventing the deleterious effects of efflorescence. The deep penetrating application retains it’s natural appearance with no surface build up or darkening effects. The masonry remains completely breathable.

Klere-Treat WB can also be applied to parking garages and flat concrete or masonry surfaces to reduce attack from deicing salts.

The advantages of Klere-Treat WB include:

    • Deep Penetration into surfaces
    • Non-film forming 
    • Does non contain wax, gum resins, silicas or silicones 
    • Unlike many water repellents Klere-Treat WB does not break down due to alkali in masonry. 
    • Resists water penetration for 10 years 
    • Highly resistant to acid rain 
    • Safe water based formula, water cleanup 
    • No toxic fumes or vapors

New Klere Treat Data New Klere Treat Data Page 2


Product MSDS