Posted on

Epoxy Coat 154 Clear 

Clear Epoxy Coat 154 – Click Here to Purchase

Clear Epoxy Coat 154 is a clear two component solvent based epoxy coating that exhibits excellent characteristics for abrasion resistance, chemical resistance, and substrate penetration.  This product is suitable as a primer for high build coatings and urethanes and meets the new VOC requirements for New York, Pennsylvania, New Jersey and other states as an industrial maintenance coating.

RECOMMENDED FOR:

Recommended for priming concrete to fill pinholes, block moisture and prepare floor to accept top coat.   This product can withstand exposure to many common solvents and chemicals.

Coverage:

500-640 Ft² depending on floor surface.  Floors that have been shot blasted or abraded with diamond tipped grinders will adsorb more material and may not cover as large or an area.  A test should be conducted to figure accurate coverage rates.

 

CURE SCHEDULE:  (70°F)

pot life – 2 gallons volume        3-5 hours

tack free (dry to touch)               2-4 hours

recoat or topcoat                          3-6 hours

light foot traffic                         10-16 hours

full cure (heavy traffic)                  2-7 days

APPLICATION TEMPERATURE:

50-90 degrees F

Posted on

Epoxy Seal Clear Coat 137M

Epoxy Seal 137M is a two component 100% solids epoxy seal coat that can be used either as a coating or filled with paint chips, marble chips and colored sand mixtures to provide an infinite array of color schemes or patterns.

Recommended for warehouses, kitchens, restrooms, and other areas where either a high build clear product is needed or where a decorative filled floor is desired.

Epoxy Seal 137M