AC-3 Cleaner – 1 gallon

$19.79

Description

AC-3 Masonry Cleaner

Ac-3  Masonry Cleaner is a fast acting, easy to use acid-base cleaner for pre-cast concrete, concrete, masonry, grout, tile and natural stone surfaces.  AC-3 Cleaner will remove cement grout haze and mortar residue, joint cement, lime & hard water deposits, efflorescence, rust and other dirt and grime.  

More than just an acid based cleaner:

Ac-3 Cleaner is one of the safest and most effective all purpose acid cleaners on the market. Formulated with a comparatively safe acid, strong detergent and carefully selected solvents AC-3 Cleaner provides fast, 3-way cleaning action.  It penetrates deeply – dissolving and dislodging dirt, oil, grease from many substrates.  Stains are bound and trapped into a foam which rises to the surface where it is rinsed or power washed away.   Ac-3 Cleaner has a pleasant, clean odor and does not emit harmful or corrosive fumes.

  • Cleans and renews old, weathered and stained concrete and masonry buildings
  • Etches and cleans concrete floors in preperation of painting
  • Prepares surface to receive weatherproof treatment or coating
  • Removes grease, dirt and oil from metal surfaces
  • Brighten and cleans off oxidation

Coverage Rates:

AC-3 Cleaner can be diluted up to 3 parts water to 1 part AC-3 as needed to clean or etch.  Coverage rate is approximately 150-200 square feet per gallon of mix.

Additional information

Weight 10 lbs
Dimensions 8 x 8 x 15 in
Dilution Rates:

AC-3 can be used full strength or diluted down to 3-1.

Coverage Rates:

Coverage rates will vary by job. Average coverage is 150-200 square feet per gallon of mix.

Protection

Cleaning masonry with an acid can leave substrate vunerable to water penetration. Protect and elongate brick, pavers, pre-cast, etc. with one of our high quality commercial grade sealers.

AC-3 product data sheet

AC-3 data sheet

AC-3 Safety Data Sheet

AC-3 SDS

You may also like…