Posted on

Epoxy Coat 154 Clear 

Clear Epoxy Coat 154 – Click Here to Purchase

Clear Epoxy Coat 154 is a clear two component solvent based epoxy coating that exhibits excellent characteristics for abrasion resistance, chemical resistance, and substrate penetration.  This product is suitable as a primer for high build coatings and urethanes and meets the new VOC requirements for New York, Pennsylvania, New Jersey and other states as an industrial maintenance coating.

RECOMMENDED FOR:

Recommended for priming concrete to fill pinholes, block moisture and prepare floor to accept top coat.   This product can withstand exposure to many common solvents and chemicals.

Coverage:

500-640 Ft² depending on floor surface.  Floors that have been shot blasted or abraded with diamond tipped grinders will adsorb more material and may not cover as large or an area.  A test should be conducted to figure accurate coverage rates.

 

CURE SCHEDULE:  (70°F)

pot life – 2 gallons volume        3-5 hours

tack free (dry to touch)               2-4 hours

recoat or topcoat                          3-6 hours

light foot traffic                         10-16 hours

full cure (heavy traffic)                  2-7 days

APPLICATION TEMPERATURE:

50-90 degrees F