Posted on

Crystal Clear 903 extra high sheen sealer for stamped and stenciled concrete

A heavy viscosity extra high sheen sealer for stamped and stenciled concrete surfaces. A minimum of 30% solids. Made from a very clear non yellowing and non blushing methyl methacrylate resin. The highest solids available which also builds up the most. Crystal Clear 903 must be applied with a brush or roller.

Available in

quarts

gallons

5 gal. pails

Posted on

Epoxy Coat 144: Abrasion and Chemical Restistant Coating

Epoxy Coat is a high solids, two part catalyzed, self curing, thermo set paint which cures
to the hardest, abrasive, chemical and solvent resistant coating.

For use on any clean, structurally sound surfaces as masonry, concrete, metal, wood, interior or exterior.

Epoxy Coat is a protective and decorative coating for floors, walls, ceilings, tanks, and other structural members
exposed to wear and abusive action due to corrosive attack caused by moisture, salt, water, most acids, alkalis, petroleum products and their fumes.

Accepted by USDA for use in meat and poultry plants, for institutions, industrial food and beverage plants, dairies, kitchens, laboratories, warehouses, etc.

 

Epoxy Coat 144

 

Available Color Chart

Please note:
The colors shown here are a digital representation of the colors available. Because of variances in color representation from one monitor to the next they should not be relied on if color matching is required in your project.

PaintChipColorChart

 

Posted on

Epoxy Seal Clear Coat 137M

Epoxy Seal 137M is a two component 100% solids epoxy seal coat that can be used either as a coating or filled with paint chips, marble chips and colored sand mixtures to provide an infinite array of color schemes or patterns.

Recommended for warehouses, kitchens, restrooms, and other areas where either a high build clear product is needed or where a decorative filled floor is desired.

Epoxy Seal 137M

Posted on

Stamped Concrete Protective Sealers

Crystal Clear 908
Low viscosity low sheen sealer for stamped and stenciled concrete

Crystal Clear 951
Medium viscosity medium sheen sealer for stamped and stenciled concrete surfaces

Crystal Clear 951-F
Same as 951 from above with added flattening agent to make into a flat sheen

Crystal Clear Standard
Medium viscosity medium to high sheen sealer for stamped and stenciled concrete surfaces

Crystal Clear 903
A heavy viscosity extra high sheen sealer for stamped and stenciled concrete surfaces

Crystal Clear 960
A low viscosity low sheen sealer for stamped and stenciled concrete