Decorative Epoxy Flakes System is a decorative and extremely durable concrete resurfacing system. It is used for environments requiring an attractive, aesthetically pleasing, high performance floor. Available in endless colors and patterns to suit any environment. Also known as decorative vinyl color chips, flakes or fleck are specially formulated paint aggregates used to enhance the aesthetic qualities of seamless, resin-based chip/flake flooring systems. This unique product is random in shape, sized within a standardized range and custom blended to match any décor.
Epoxy Flake floorsare continuing to gain popularity amongst architects, designers, contractors and consumers, because of their unique properties that deliver complete customization to commercial, residential and industrial floors with an endless range color-styles, texture, size and blending options.
Klere-Treat WB is a non film forming brick sealer and it is non toxic. A wet on wet application will stop water from soaking into the bricks and mortar joints. Klere-Treat is a heavy duty professional sealer that can be applied with a simple hand held pump sprayer or spray bottle. Application is quick and easy.
A Time Tested Formula
Chargar Corp. has been manufacturing Klere-Treat WB for over 30 years. It has safely protected schools and universities, churches, large high rise buildings, commercial and industrial warehouses and more.
A neglected brick chimney will look like one of these pictured here within a few years of neglect. The Chargar Corporation under the trade name of Florok, manufactures brick sealers that are clear, odorless, and non toxic. The Chargar Corportion has been manufacturing clear masonry sealers since 1950. The experts at The Chargar Corporation can suggest the best method of repair for your brick chimney as well as suggest the best sealer for your particular application. 1-800-922-4623 firstname.lastname@example.org
This is what a brick chimney will look like with a few years of neglect. The Chargar Corporation manufactures a clear professional grade water repellents that will prevent much of what you see in this picture . Many owners of single family homes think that it requires special equipment to seal bricks. This is not true, Klere-Treat WB can be applied with what many call bug sprayers or hand pump up sprayers. A good saturating application of Klere-Treat WB will protect your investment and save you in hundreds of dollars in repointing work or complete rebuild. Klere -Treat WB is non toxic and non hazardous, it lasts as much as 10 years. Klere-Treat WB works by soaking into the pores of the masonry chimney and chemically reacts from the alkalinity within the masonry to form a water repellent barrier and is completely breathable. For more information on Klere-Treat WB go to www.chargar.com and click on water repellents or call one of our technical advisors at 1-800-922-4623
De-Icings salts such as rock salt, calcium chloride, magnesium chloride, and other salt related products all do damage to concrete surfaces. The resulting slurry of melted ice and salt is absorbed into the concrete causing spalling and general erosion of the surface. Salt Block WB does not allow the salty slurry created by the de-icing salt from soaking into the concrete and destroying your concrete surface. A chemical reaction occurs within the pores of the concrete creating an invisible barrier which prevents absorption into the surface. A treatment of Salt Block will save you hundreds of dollars in future concrete repairs.
What if the damage is already done?
Concrete that has pitted and spalled needs to be repaired using a concrete repair mortar such as Plas-Tex Powder. All broken and loose concrete needs to be removed prior to patching to ensure the patch gets a strong, permanent bond. Once all patching has been completed and allowed to cure the surface can now be sealed with Salt Block WB to protect and prevent future damage from de-icing salts.
Epoxy waterproofer is a specially formulated heavy bodied thermo setting Epoxy resin. When mixed with it’s activator it becomes self curing and hardens to a ceramic like, non porous, impermeable clear film. If you would prefer a color Epoxy Water proofer is also available with
color packs offering up to 35 different color combinations.
Since it is 100% solids, it can be applied from a thin brush application to 1/16th or 1/8th inch thick claddding that can withstand tons of hydrostatic pressure.
Epoxy Waterproofer is designed to be a heavy duty waterproof protective coating that seals porous surfaces, fine cracks and voids. (Sand may be added for wide crack filler)
It is also highly suitable for coating and lining tanks, submerged concrete units, troughs, pipe, utility ducts, etc. Also excellent to seal off leaks in below grade basement wall areas.
Epoxy Waterproofer is also used to waterproof Koi Fish ponds, Waterfalls, Fountains, bird Baths, Water Cisterns for potable water. Coverage rate for qt. units 25 sq. ft .
Available Color Chart
The colors shown here are a digital representation of the colors available. Because of variances in color representation from one monitor to the next they should not be relied on if color matching is required in your project.
You see it in the news a lot where a chemical tank leaks a hazardous material into a river, a body of water or in the ground. You would think that if you are going to have storage tanks with hazardous chemicals, someone within the company should be responsible to check that the secondary concrete or block walls which are supposed to contain any accidental spillage are in good shape. A simple spot check could have saved that company a lot of aggravation. If the containment wall has cracks in it, then fix it! Chargar’s Epoxy Waterproofer would be a fast and inexpensive solution to any containment wall or floor cracks which as you have seen in the news can leak chemicals. Chargar’s Epoxy Waterproofer is a heavy bodied Epoxy which can be brushed over a crack, bridging it and not allow any chemical to leak out. Maybe a few dollars can or could have saved a particular company from having to file bankruptcy. This could have been done as an emergency repair as soon as the crack became visible to an inspector within the company. Most importantly that chemical could have been kept out of the local water supply.
The old method was to chip out the crack patch it with hydraulic cement but Epoxy Waterproofer eliminates the chipping out on small hairline cracks. Simply brush apply a nice even coat over the crack, allow it to cure and water will no longer penetrate the foundation wall. For larger and structural cracks try Chargar’s Epoxy Injection system.
Enviro-Shield is an alcohol based, VOC compliant, high performance, clear, penetrating water repellent sealer.
It is designed to provide long term protection for brick, blocks, Jersey barriers, vertical or horizontal concrete and natural stones and other porous surfaces.
Enviro-Shield repels water on masonry surfaces for up to 10 years and can be sprayed with a low pressure sprayer, allowing it to thoroughly soak the surface up 1/2″ deep.
Enviro-Shield is easy to use. Overspray can be washed off with soap and water. Sprayers and tools can be washed with soap and water.
Enviro-shield is available in formulas of 20% solids and 40% solids. Enviro-shield is an excellent cold weather water repellent since it will not freeze.
Enviro-shield passes the NHCRP244 series test,full data on record.
Klere-Treat WB is a masonry water repellent based on a silane and siloxane. Under the influence of atmospheric humidity, it chemically reacts with and bonds to masonry, forming a highly effective poly-siloxane repellent. It is highly alkaline resistant and designed for use on brick, concrete block, precast concrete, stucco, limestone, fieldstone and many other natural stones.
Kleare-Treat WB provides superior protection against moisture penetration, thereby preventing the deleterious effects of efflorescence. The deep penetrating application retains it’s natural appearance with no surface build up or darkening effects. The masonry remains completely breathable.
Klere-Treat WB can also be applied to parking garages and flat concrete or masonry surfaces to reduce attack from deicing salts.
The advantages of Klere-Treat WB include:
Deep Penetration into surfaces
Does non contain wax, gum resins, silicas or silicones
Unlike many water repellents Klere-Treat WB does not break down due to alkali in masonry.