Posted on

Klere Treat WB – Ready to Use Masonry Water Repellent

brick sealer Klere-Treat WB

Klere-Treat WB is a masonry water repellent based on a silane and siloxane. Under the influence of atmospheric humidity, it chemically reacts with and bonds to masonry, forming a highly effective poly-siloxane repellent.  It is highly alkaline resistant and designed for use on brick, concrete block, precast concrete, stucco, limestone, fieldstone and many other natural stones.

Kleare-Treat WB provides superior protection against moisture penetration, thereby preventing the deleterious effects of efflorescence. The deep penetrating application retains it’s natural appearance with no surface build up or darkening effects. The masonry remains completely breathable.

Klere-Treat WB can also be applied to parking garages and flat concrete or masonry surfaces to reduce attack from deicing salts.

The advantages of Klere-Treat WB include:

    • Deep Penetration into surfaces
    • Non-film forming 
    • Does non contain wax, gum resins, silicas or silicones 
    • Unlike many water repellents Klere-Treat WB does not break down due to alkali in masonry. 
    • Resists water penetration for 10 years 
    • Highly resistant to acid rain 
    • Safe water based formula, water cleanup 
    • No toxic fumes or vapors

New Klere Treat Data New Klere Treat Data Page 2




 

Product MSDS

 

 

Posted on

A premium grade, water based masonry water repellent based on a silane and siloxane blend.

Enviro-Shield 40WB is a water based, VOC compliant, high performance, clear, penetrating water repellent sealer.  It is designed to provide long term protection for brick, blocks, Jersey barriers, vertical or horizontal concrete and natural stones and other porous surfaces.

Enviro-Shield 40WB repels water on masonry surfaces for up to 10 years and can be sprayed with a low pressure sprayer, allowing it to thoroughly soak the surface up 1/2″ deep.

Enviro-Shield is easy to use. Overspray can be washed off with soap and water. Sprayers and tools can be washed with soap and water.

Enviro-shield is available in formulas of 20% solids and 40% solids. Enviro-shield is an excellent cold weather water repellent since it will not freeze.

Enviro-Shield WB DATA

Posted on

Epoxy Seal Heavy Duty Sealer and Cladding

Epoxy Seal is a two component, 100% epoxy solids finishing system which consists of an epoxy resin
that cures chemically when mixed with either polyamide or amine adduct curing agent. If forms
a high build up, tile like coating or cladding.

Epoxy Seal will seal, protect adn beautifiy walls, floors, ceilings, tanks, troughs, aisles, ramps, duct work, beams, etc.
exposed to extreme wear and corrosive conditions.

Microsoft Word - HighBuildEpoxySystem Flake chips075

Posted on

Plas Tex Concrete and Mortar Bonding Agent and Admixture

Plas-Tex is a water dispersion of acrylic polymers. It is specifically designed to be used as an integral admixture to
modify Portland cement compositions; as, concrete, mortar and stucco. It’s use offers many distinct advantages when compared
to unmodified concrete, such as, greater Tensile Strength, Compressive Strength, Flexural Stength, Impact Strength and Abrasion Resistance.

Plas-Tex modified concrete or mortar is especially useful in thin section repairs or overlays as it improves the adhesion, cohesion and resiliency, as
well as wearing quality and durability, especially when heavy vibration and traffic is experienced.

Product Data Sheet

MSDS Sheet

Posted on

Plas Tex Concentrate Concrete and Mortar Bonding Agent and Admixture

Plast-Tex concentrate is to be diluted with one to three parts of water before using.

Plas-Tex is a water dispersion of acrylic polymers. It is specifically designed to be used as an integral admixture to
modify Portland cement compositions; as, concrete, mortar and stucco. It’s use offers many distinct advantages when compared
to unmodified concrete, such as, greater Tensile Strength, Compressive Strength, Flexural Stength, Impact Strength and Abrasion Resistance.

Plas-Tex modified concrete or mortar is especially useful in thin section repairs or overlays as it improves the adhesion, cohesion and resiliency, as well as wearing quality and durability, especially when heavy vibration and traffic is experienced.

Posted on

Plas Tex RTU Concrete and Mortar Bonding Agent and Admixture

Plast-Tex RTU (Ready To Use) -for most general work

Plas-Tex is a water dispersion of acrylic polymers. It is specifically designed to be used as an integral admixture to
modify Portland cement compositions; as, concrete, mortar and stucco. It’s use offers many distinct advantages when compared
to unmodified concrete, such as, greater Tensile Strength, Compressive Strength, Flexural Stength, Impact Strength and Abrasion Resistance.

Plas-Tex modified concrete or mortar is especially useful in thin section repairs or overlays as it improves the adhesion, cohesion and resiliency, as
well as wearing quality and durability, especially when heavy vibration and traffic is experienced.

Posted on

Metallic Floor Hardener

Data on our Metallic Floor Hardener has not yet been posted to our website.

Please contact us via phone, fax or email if your require further product data. Our customer service staff is ready to assist you.

Posted on

Epoxy Adhesive Injection Grout System

Epoxy Adhesives consists for a wide range of special 100% solids Epoxy Resins/Activator formulations. Each one is designed to perform definite adhesive functions that are ideally suited for high pressure injection grouting. Epoxy Adhesive MV is of medium viscosity for general purpose work. LV is low viscosity for hair line crack sealing. HV is heavy viscosity for wide crack use. These products are resistant to water, moisture and most chemicals. When fully cured, its adhesion, cohesion, compressive, and tensile strength is many time greater that the highest grade concrete available, which makes it highly suitable to reunite and repair structural cracks and voids caused by foundation settlement, over loading, wear and building movement. Epoxy Adhesive will grout and seal crack and voids in concrete and masonry, to repair, rebond and weld structural units and surfaces together, fast and economically.

Epoxy Injection data pg1Epoxy Injection data pg2grease gun fitting stud bushing Image grease fitting