Posted on

Concrete Cure and Seal Non resinous membrane

Concrete curing compounds Concrete Cure and Seal is a water dispersed emulsion of inorganic copolymer and penetrating agents. Formulated specifically to cure, seal and chemically harden concrete surfaces in one application.
In addition to it’s sealing and curing capabilities, it leaves a rough wearing film that is resistant to traffic abuse and the penetration of oil and most chemicals. Permits adhesive application for laying tile. May be painted over. Resists sticking of waste concrete and mortar drippings.

Non-Flamable, non-toxic. Easy to apply by spray, roller or brush. Use on industrial floor slabs, sidewalks, walls and architectural panels.

Posted on

Hydro-Crete Accelerating Integral Admixture for Concrete and Mortar

Hydro-Crete is a concentrated liquid chemical solution which is to be added to concrete of mortar.
It is a time tested proven formula designed to greatly improve mixing, pouring, placing, speed in setting and final strength of all types of concrete and mortar.

When added to concrete and mortar it greatly reduces original water requirements, while still improving workability, slump, waterproofing quanlities and strengths at all ages.

Hydro-Crete speeds setting, waterproofing and durabiliry of concrete floors, foundations, walls, columns, tanks, walks and masonry mortar.

Hydro-Crete data

Hydro-Crete data

Posted on

Concrete Cure and Seal SR40 Modified acrylic copolymer

Concrete cure and seal SR40 is a modified acrylic copolymer dispersed in mild aliphatic hydrocarbons.
It is to be applied to new concrete to cure, seal and harden it’s surface.

SR40 resists most chemicals, grease, oil, road salts and mild solvents. It is extra safe for use on interior areas
as residential and industrial work (a non red label product). May also be used on exterior surfaces as bridges, decks, parking garages, and sidewalks.

SR40 is Non yellowing and dries tack free in 90 min. It is also ideally suited as a good sealer for old concrete floors.

Posted on

Concrete Cure and Seal Non resinous membrane

Concrete Cure and Seal is a water dispersed emulsion of inorganic copolymer and penetrating agents. Formulated specifically to cure,
seal and chemically harden concrete surfaces in one application.

In addition to it’s sealing and curing capabilities, it leaves a rough wearing film that is resistant to traffic abuse and the penetration of oil and most chemicals.
Permits adhesive application for laying tile. May be painted over. Resists sticking of waste concrete and mortar drippings.

Non-Flamable, non-toxic. Easy to apply by spray, roller or brush. Use on industrial floor slabs, sidewalks, walls and architectural panels.

Posted on

Concrete Cure WB20 Water based concrete curing compound

Cure and Seal WB20 is a VOC compliant concrete curing compound and sealer. Cure and Seal WB20 is an emulsified acrylic polymer designed to provide solvent based performance from a water emulsion system. Films of Concrete Cure and Seal are crystal clear, water white polymer film which is resistant to water, chemicals, and interior and exterior applications.

Cure&sealwb20 data NEWCure & Seal WB20 SDS