Posted on
Pond Leak waterproofer

Pond Leak?

Does your pond leak?  Many fish ponds are constructed of cement plaster over concrete blocks.  From thermal movement these ponds will sometimes develop hairline cracks which will then leak water out.  Many people will chip the crack out and do the usual hydraulic cement patch, and within a short period of time it cracks again.  The Chargar Corporation has developed a thick 100% epoxy coating that can bridge the crack, waterproof it and prevent further cracking from movement.  The Epoxy Waterproofer can be brushed applied over the crack forming a 15 mil impervious film. It has slight expansion and contraction ability. It comes in clear or colors.

Won’t Harm the Fish

Since Epoxy Waterproofer is 100% solids it becomes completely inert once it has fully cured.  This means that it will not leach any harmful chemicals and will not hurt the livestock.  It will not cause any algae issues by leaching nitrates or phosphates.  Customers have used this epoxy to seal ponds for over 30 years with no ill effects.

To order Epoxy Waterproofer – Click here

Other Uses

Ponds aren’t the use for Epoxy Waterproofer.  It can be used to build and seal water fountains of any size.  Since it is safe to use with potable water many customers in the agricultural industry have used it to waterproof animal drinking troughs and and cisterns.

For more information call 800-922-4623 or email answers@chargar.com

Posted on

Klere-Treat WB – Invisible water based sealer for brick and masonry

brick sealer Klere-Treat WB

Klere-Treat WB is a premium grade masonry water repellent used to seal brick and masonry without altering the surface appearance.  It is designed to penetrate into the brick and work entirely below the surface.  It doesn’t change the look or color of the brick and provides exceptional protection against efflorescence, staining, salt and freeze thaw spalling for porous building materials including brick, concrete, natural stone, and grout.  Surfaces remain breathable to allow trapped moisture to escape.

Properties/Benefits of Klere-Treat WB

  • Effective protection against water
  • Reduced primary and secondary efflorescence of building materials
  • Protection against de-icing salts
  • Reduced corrosion of steel reinforced concrete
  • A non-tacky finish with stain release effect
  • Alkali resistance
  • Reduction in heat conductivity and thus, improved thermal insulation
  • No reduction of water vapor permeability
  • In most cases no change in surface appearance
  • Solvent-free and low VOC

To purchase Klere-Treat WB – Click Here

 

Posted on

Shower Grout Sealer –

shower grout sealer

The Best Shower Grout Sealer

Shower grout is just a mixture of sand, cement and water; so it is naturally porous and absorbent. Left unsealed, it can soak up dirt and mildew like a sponge and once it gets in… it can be time consuming to get out. You can seal the grout easily without breaking the bank.

Ultimate Stain Repellent is a shower grout sealer like no other.  It penetrates deep into the grout between tiles chemically reacting to a form a hydrophobic and oleo-phobic layer.  This chemical reaction blocks the further passage of moisture between tiles and keeps the shower recess watertight.  Not only does it block the passage of water, unlike other sealers, it also blocks oils from soaps and shampoos that can leave hard to clean stains.

Water Based Formula

This water based formula is safe for use in any shower, indoor or outdoors.  There is no strong odor when applying Ultimate Stain Repellent and there is no change to the appearance of the tile or grout.  This material penetrates deeply for long lasting protection and easy cleaning.

 

To purchase Ultimate Stain Repellent – Click Here

For more information email answers@chargar.com or call 800-922-4623

Posted on

Epoxy Coat 154 Clear 

Clear Epoxy Coat 154 – Click Here to Purchase

Clear Epoxy Coat 154 is a clear two component solvent based epoxy coating that exhibits excellent characteristics for abrasion resistance, chemical resistance, and substrate penetration.  This product is suitable as a primer for high build coatings and urethanes and meets the new VOC requirements for New York, Pennsylvania, New Jersey and other states as an industrial maintenance coating.

RECOMMENDED FOR:

Recommended for priming concrete to fill pinholes, block moisture and prepare floor to accept top coat.   This product can withstand exposure to many common solvents and chemicals.

Coverage:

500-640 Ft² depending on floor surface.  Floors that have been shot blasted or abraded with diamond tipped grinders will adsorb more material and may not cover as large or an area.  A test should be conducted to figure accurate coverage rates.

 

CURE SCHEDULE:  (70°F)

pot life – 2 gallons volume        3-5 hours

tack free (dry to touch)               2-4 hours

recoat or topcoat                          3-6 hours

light foot traffic                         10-16 hours

full cure (heavy traffic)                  2-7 days

APPLICATION TEMPERATURE:

50-90 degrees F

Posted on

Leaking basement walls

waterproof sealer, basement sealer

Stop water leaks through my basement wall?

Stop Water – This is a common problem that has a very simple solution.  Water can seep through foundation walls leaving stains on the surface or even puddles on the floor.  Stop the water for good with Epoxy Waterproofer!  We have been making this 2 part waterproofing epoxy for 40 years and have stopped thousands of gallons of water from damaging basements.

It’s Safe and Easy to Apply

No solvents are added to this 100% epoxy, there is no obnoxious smells or toxic fumes.  Application is as easy as mixing the part B into the part A and then applying with a brush or roller over the affected areas.  Add color packs if desired in order to tint the epoxy to easier blend or hide repairs.

Epoxy Waterproofer withstands hydro-static pressure and will not peel or flake off of the surface.

To purchase Epoxy Waterproofer – Click Here

 

Posted on

Epoxy Systems

Epoxy floor coatings and sealants

If you are looking for epoxy floor coatings you have come to the right place.  We carry a wide variety of commercial and industrial grade epoxies for all of your flooring needs.

Decorative Epoxy Flake
Decorative Flake System is a decorative and extremely durable concrete resurfacing system.  It is used for environments requiring an attractive, aesthetically pleasing, high performance floor.

Epoxy Injection Grout
Epoxy Injection Grout will grout and seal crack and voids in concrete and masonry, to repair, re-bond and weld structural units and surfaces together, fast and economically.

Epoxy Coat CL-28 Clear
Epoxy Coat CL-28 Clear is a low viscosity sealer for deep penetration.

Epoxy Coat 144 Colored
Colored paint for floors and walls

Epoxy Seal 100%
100% solids, high build up floors and walls

Fast Set 349 Polyaspartic
Fast Set Polyaspartic Urethane 349 is a two component 100% solids polyaspartic aliphatic urethane seamless binder for broadcast systems.

Epoxy Adhesive 100
General purpose adhesives

Waterproofer
Heavy bodied brush on paint

Epoxy Seal 100% Clear Coat
Epoxy Seal 137M is a two component 100% solids epoxy seal coat that can be used either as a coating or filled with paint chips, marble chips and colored sand mixtures to provide an infinite array of color schemes or patterns.

Hydropoxy
Water based epoxy-waterproof

Posted on

Fast Set Polyaspartic Urethane 349

Don’t let time cost you the job!

Click Here to Purchase         

Some jobs require a fast set for quick turn around time, such as busy restaurant kitchens, entry ways to hospitals and other areas where production shutdown is problematic. Most epoxies require 12-24 hours to cure. However, the outstanding feature of this product is its exceptionally quick tack free time for foot traffic, light foot traffic in 2-5 hours.  This material can be used with dried colored sand mixtures to provide an infinite array of color schemes or patterns.

Fast Set Polyaspartic Urethane 349 is a two component 100% solids polyaspartic aliphatic urethane seamless binder for broadcast systems.  This material can be used with dried colored sand mixtures to provide an infinite array of color schemes or patterns. Fast Set Polyaspartic Urethane 349 has excellent chemical resistance, hardness, abrasion resistance, UV stability and has an excellent clear Gardner color.

Recommended For

Recommended for areas where a high build broadcasted floor is desired and installation downtime is very limited.  Our customers have used this product in commercial kitchens, public entry ways to high traffic buildings, 24 hour manufacturing locations.  Light foot traffic in 2-5 hours

Average cure times

pot life – (150 gram mass)……………………..…………..30-60 minutes (actual usable working time is approximately 15-25 minutes)

tack free (dry to touch)…………………………………………..1-3 hours

recoat or topcoat…..…………….……..…………………………2-4 hours

light foot traffic………………………………………………….…2-5 hours

full cure (heavy traffic)… …………………..……..……….24-48 hour

Click Here to Purchase

Polyaspartic 349

Posted on

Epoxy Coat Decorative Flake System

Epoxy Flake Flooring System

Decorative Epoxy Flakes System

Decorative Epoxy Flakes System is a decorative and extremely durable concrete resurfacing system.  It is used for environments requiring an attractive, aesthetically pleasing, high performance floor.  Available in endless colors and patterns to suit any environment.   Also known as decorative vinyl color chips, flakes or fleck are specially formulated paint aggregates used to enhance the aesthetic qualities of seamless, resin-based chip/flake flooring systems. This unique product is random in shape, sized within a standardized range and custom blended to match any décor.

Epoxy Flake floors are continuing to gain popularity amongst architects, designers, contractors and consumers, because of their unique properties that deliver complete customization to commercial, residential and industrial floors with an endless range color-styles, texture, size and blending options.

 

Posted on

Brick Sealer Non Toxic

Silane |Siloxane water repellent

Brick Sealer – Prevent leaking chimneys

Brick sealer will stop water leaks
Keep your chimney water tight with Klere-Treat WB.

Klere-Treat WB is a non film forming brick sealer and it is non toxic.  A wet on wet application will stop water from soaking into the bricks and mortar joints.  Klere-Treat is a heavy duty professional sealer that can be applied with a simple hand held pump sprayer or spray bottle.  Application is quick and easy.

A Time Tested Formula

Chargar Corp. has been manufacturing Klere-Treat WB for over 30 years.  It has safely protected schools and universities, churches, large high rise buildings, commercial and industrial warehouses and more.

For questions on Klere-Treat WB send us a e-mail at answers@chargar.com or call 1-800-922-4623.  Click here to Purchase Klere-Treat WB.