Energex Stucco System Finish Coat
Jan29

Energex Stucco System Finish Coat

The Energex Finish Coats are durable coatings which provide surface color and textre for the Energex Stucco System.  These finishes can be applied as well over exterior masonry, stucco, precast or cast-in-place concrete, cement block, and other approved substrates.  These finishes are also suitable for interior applications. Choose from a variety of colors and...

Read More
Energex Stucco System Figerglass Mesh
Jan29

Energex Stucco System Figerglass Mesh

Use a stainless steel trowel to apply ENERMIX DRY Base Coat to the surface in  a uniform thickness as recommended for the type of reinforcing mesh being installed.  Immediately, place the reinforcing mesh against the wet Base Coat. The surface of the Base Coat is smoothed with a trowel until the reinforcing mesh is fully embedded. The pattern of the mesh must not be...

Read More

Energex Stucco System – Base Coat

          ENERMIX DRY base coat is used to adhere insulation board to an approved substrate and to embed reinforcing mesh as part of the base coat of the ENERGEX System. The mixture can also be used as a skim coat to produce a smooth level surface on masonry or...

Read More
Enviro-Shield 40% – Alcohol Based Water Repellent
Oct28

Enviro-Shield 40% – Alcohol Based Water Repellent

Enviro-Shield is an alcohol based, VOC compliant, high performance, clear, penetrating water repellent sealer. It is designed to provide long term protection for brick, blocks, Jersey barriers, vertical or horizontal concrete and natural stones and other porous surfaces. Enviro-Shield repels water on masonry surfaces for up to 10 years and can be sprayed with a low pressure sprayer, allowing it to thoroughly soak the surface up...

Read More
Klere Treat WB – Ready to Use Masonry Water Repellent
Oct28

Klere Treat WB – Ready to Use Masonry Water Repellent

Klere-Treat WB is a masonry water repellent based on a silane and siloxane. Under the influence of atmospheric humidity, it chemically reacts with and bonds to masonry, forming a highly effective poly-siloxane repellent. It is highly alkaline resistant and designed for use on brick, concrete block, precast concrete, stucco, limestone, fieldstone and many other natural stones. Kleare-Treat WB provides superior protection against...

Read More
A premium grade, water based masonry water repellent based on a silane and siloxane blend.
Oct28

A premium grade, water based masonry water repellent based on a silane and siloxane blend.

Enviro-Shield 40WB is a water based, VOC compliant, high performance, clear, penetrating water repellent sealer.  It is designed to provide long term protection for brick, blocks, Jersey barriers, vertical or horizontal concrete and natural stones and other porous surfaces. Enviro-Shield 40WB repels water on masonry surfaces for up to 10 years and can be sprayed with a low pressure sprayer, allowing it to thoroughly soak the surface...

Read More
AC 3 Cleaner all purpose acid cleaners
Oct27

AC 3 Cleaner all purpose acid cleaners

AC-3 is one of the safest and most effective all purpose acid cleaners on the market. Compounded with a comparatively safe acid, strong detergent and solvents to provide a fast 3 way cleaning action. Accidental splashing will not cause skin burns or discomfort, nor will it harmfully effect most masonry surfaces. AC-3 Acid Cleaner has a pleasant clean odor and dispels no harmful or corrosive fumes. AC-3 three way cleaning action will...

Read More
Epoxy Topping Floor Surfacing and Patching
Oct27

Epoxy Topping Floor Surfacing and Patching

This unit contains: Epoxy resin, epoxy activator, aggregate, epoxy solvent and trowel aid and direction sheet. Surfaces to which Epoxy Topping is to be applied must be structurally sound sound clean and dry....

Read More
Epoxy Adhesive Injection Grout System
Oct27

Epoxy Adhesive Injection Grout System

Epoxy Adhesives consists for a wide range of special 100% solids Epoxy Resins/Activator formulations. Each one is designed to perform definite adhesive functions that are ideally suited for high pressure injection grouting. Epoxy Adhesive MV is of medium viscosity for general purpose work. LV is low viscosity for hair line crack sealing. HV is heavy viscosity for wide crack use. These products are resistant to water, moisture and most...

Read More