Fast Set Polyaspartic Urethane 349
May11

Fast Set Polyaspartic Urethane 349

Fast Set Polyaspartic Urethane 349 is a two component 100% solids polyaspartic aliphatic urethane seamless binder for broadcast systems.  This material can be used with dried colored sand mixtures to provide an infinite array of color schemes or patterns. Fast Set Polyaspartic Urethane 349 has excellent chemical resistance, hardness, abrasion resistance, UV stability and has an excellent clear Gardner color.  However, the outstanding...

Read More
How do I Epoxy Coat my garage floor
Mar04
Read More
Epoxy Waterproofer Thermo Setting Epoxy
Jul14

Epoxy Waterproofer Thermo Setting Epoxy

Epoxy waterproofer is a specially formulated heavy bodied thermo setting Epoxy resin. When mixed with it’s activator it becomes self curing and hardens to a ceramic like, non porous, impermeable clear film. If you would prefer a color Epoxy Water proofer is also available with color packs offering up to 35 different color combinations. Since it is 100% solids, it can be applied from a thin brush application to 1/16th or 1/8th...

Read More
How to Repair Chatahoochie Stone Decks
Mar01

How to Repair Chatahoochie Stone Decks

The proper repair and maintenance of pebble stone decks is critical if you are planning on keeping your deck for a long time. Neglecting these decks is a sure path to future failure and disastrous results. Many of the calls that we take in our technical services department concerning stone decks are always at the point where the stones are loose and popping off. A good preventative program and not to loose stones is to seal the deck...

Read More
Epoxy Injection made easy
Jan31

Epoxy Injection made easy

There are a lot of companies selling their systems for injecting Epoxy into concrete cracks either to waterproof them or to structurally weld the concrete. All of these companies sell you everything you need but by the time you are finished purchasing everything the cost runs into the hundreds of dollars. We have devised a proven system that utilizes nothing more than grease fittings and bushings used in the automotive industry. For...

Read More
Energex Stucco System Finish Coat
Jan29

Energex Stucco System Finish Coat

The Energex Finish Coats are durable coatings which provide surface color and textre for the Energex Stucco System.  These finishes can be applied as well over exterior masonry, stucco, precast or cast-in-place concrete, cement block, and other approved substrates.  These finishes are also suitable for interior applications. Choose from a variety of colors and...

Read More
Energex Stucco System Figerglass Mesh
Jan29

Energex Stucco System Figerglass Mesh

Use a stainless steel trowel to apply ENERMIX DRY Base Coat to the surface in  a uniform thickness as recommended for the type of reinforcing mesh being installed.  Immediately, place the reinforcing mesh against the wet Base Coat. The surface of the Base Coat is smoothed with a trowel until the reinforcing mesh is fully embedded. The pattern of the mesh must not be...

Read More

Energex Stucco System – Base Coat

          ENERMIX DRY base coat is used to adhere insulation board to an approved substrate and to embed reinforcing mesh as part of the base coat of the ENERGEX System. The mixture can also be used as a skim coat to produce a smooth level surface on masonry or...

Read More
Leaking containment tanks
Jan29

Leaking containment tanks

You see it in the news a lot where a chemical tank leaks a hazardous material into a river, a body of water or in the ground.  You would think that if you are going to have storage tanks with hazardous chemicals, someone within the company should be responsible to check that the secondary concrete or block walls which are supposed to contain any accidental spillage are in good shape. A simple spot check could have saved that company a...

Read More
How to repair foundation wall crack
Jan27

How to repair foundation wall crack

The old method was to chip out the crack patch it with hydraulic cement but Epoxy Waterproofer eliminates the chipping out on small hairline cracks. Simply brush apply a nice even coat over the crack, allow it to cure and water will no longer penetrate the foundation wall.  For larger and structural cracks try Chargar’s Epoxy Injection...

Read More
Klere Treat WB – Ready to Use Masonry Water Repellent
Oct28

Klere Treat WB – Ready to Use Masonry Water Repellent

Klere-Treat WB is a masonry water repellent based on a silane and siloxane. Under the influence of atmospheric humidity, it chemically reacts with and bonds to masonry, forming a highly effective poly-siloxane repellent. It is highly alkaline resistant and designed for use on brick, concrete block, precast concrete, stucco, limestone, fieldstone and many other natural stones. Kleare-Treat WB provides superior protection against...

Read More
A premium grade, water based masonry water repellent based on a silane and siloxane blend.
Oct28

A premium grade, water based masonry water repellent based on a silane and siloxane blend.

Enviro-Shield 40WB is a water based, VOC compliant, high performance, clear, penetrating water repellent sealer.  It is designed to provide long term protection for brick, blocks, Jersey barriers, vertical or horizontal concrete and natural stones and other porous surfaces. Enviro-Shield 40WB repels water on masonry surfaces for up to 10 years and can be sprayed with a low pressure sprayer, allowing it to thoroughly soak the surface...

Read More
Epoxy Seal Heavy Duty Sealer and Cladding
Oct27

Epoxy Seal Heavy Duty Sealer and Cladding

Epoxy Seal is a two component, 100% epoxy solids finishing system which consists of an epoxy resin that cures chemically when mixed with either polyamide or amine adduct curing agent. If forms a high build up, tile like coating or cladding. Epoxy Seal will seal, protect adn beautifiy walls, floors, ceilings, tanks, troughs, aisles, ramps, duct work, beams, etc. exposed to extreme wear and corrosive...

Read More
Plas Tex Concrete and Mortar Bonding Agent and Admixture
Oct27

Plas Tex Concrete and Mortar Bonding Agent and Admixture

Plas-Tex is a water dispersion of acrylic polymers. It is specifically designed to be used as an integral admixture to modify Portland cement compositions; as, concrete, mortar and stucco. It’s use offers many distinct advantages when compared to unmodified concrete, such as, greater Tensile Strength, Compressive Strength, Flexural Stength, Impact Strength and Abrasion Resistance. Plas-Tex modified concrete or mortar is...

Read More
Plas Tex Concentrate Concrete and Mortar Bonding Agent and Admixture
Oct27

Plas Tex Concentrate Concrete and Mortar Bonding Agent and Admixture

Plast-Tex concentrate is to be diluted with one to three parts of water before using. Plas-Tex is a water dispersion of acrylic polymers. It is specifically designed to be used as an integral admixture to modify Portland cement compositions; as, concrete, mortar and stucco. It’s use offers many distinct advantages when compared to unmodified concrete, such as, greater Tensile Strength, Compressive Strength, Flexural Stength,...

Read More
Plas Tex RTU Concrete and Mortar Bonding Agent and Admixture
Oct27

Plas Tex RTU Concrete and Mortar Bonding Agent and Admixture

Plast-Tex RTU (Ready To Use) -for most general work Plas-Tex is a water dispersion of acrylic polymers. It is specifically designed to be used as an integral admixture to modify Portland cement compositions; as, concrete, mortar and stucco. It’s use offers many distinct advantages when compared to unmodified concrete, such as, greater Tensile Strength, Compressive Strength, Flexural Stength, Impact Strength and Abrasion...

Read More
Epoxy Topping Floor Surfacing and Patching
Oct27

Epoxy Topping Floor Surfacing and Patching

This unit contains: Epoxy resin, epoxy acitvator, aggregate, epoxy solvent and trowel aid. Surfaces to which Epoxy Topping is to be applied must be structurally sound sound clean and dry.

Read More
Metallic Floor Hardener
Oct27

Metallic Floor Hardener

Data on our Metallic Floor Hardener has not yet been posted to our website. Please contact us via phone, fax or email if your require further product data. Our customer service staff is ready to assist you.

Read More
Epoxy Topping Floor Surfacing and Patching
Oct27

Epoxy Topping Floor Surfacing and Patching

This unit contains: Epoxy resin, epoxy activator, aggregate, epoxy solvent and trowel aid and direction sheet. Surfaces to which Epoxy Topping is to be applied must be structurally sound sound clean and dry....

Read More
Epoxy Adhesive Injection Grout System
Oct27

Epoxy Adhesive Injection Grout System

Epoxy Adhesives consists for a wide range of special 100% solids Epoxy Resins/Activator formulations. Each one is designed to perform definite adhesive functions that are ideally suited for high pressure injection grouting. Epoxy Adhesive MV is of medium viscosity for general purpose work. LV is low viscosity for hair line crack sealing. HV is heavy viscosity for wide crack use. These products are resistant to water, moisture and most...

Read More
Epoxy Coat 144:  Abrasion and Chemical Restistant Coating
Oct27

Epoxy Coat 144: Abrasion and Chemical Restistant Coating

Epoxy Coat is a high solids, two part catalyzed, self curing, thermo set paint which cures to the hardest, abrasive, chemical and solvent resistant coating. For use on any clean, structurally sound surfaces as masonry, concrete, metal, wood, interior or exterior. Epoxy Coat is a protective and decorative coating for floors, walls, ceilings, tanks, and other structural members exposed to wear and abusive action due to corrosive attack...

Read More
Epoxy Seal Clear Coat 137M
Oct27

Epoxy Seal Clear Coat 137M

Epoxy Seal 137M is a two component 100% solids epoxy seal coat that can be used either as a coating or filled with paint chips, marble chips and colored sand mixtures to provide an infinite array of color schemes or patterns. Recommended for warehouses, kitchens, restrooms, and other areas where either a high build clear product is needed or where a decorative filled floor is...

Read More
Floor and Wall Resurfacing and Treatment
Aug26

Floor and Wall Resurfacing and Treatment

Plast-Tex Acrylic bonding agent and admixture Plast-Tex Concentrate Dilute before mixing with sand/cement Plast-Tex Ready to Use Use as is with sand/cement Epoxy Topping Unit Epoxy trowel on surfacing Metallic Floor Hardener Trowel into new concrete floors

Read More